User's Manual

4
Button operations
Name Indicator status Operation Function
Wi-Fi
Button
Flashing rapidly in red
Press and
hold the
button for 3
seconds
Switch Smart Mode to AP Mode
Flashing slowly in red Switch AP Mode to Smart Mode
Flashing in green Reset Wi-Fi configuration
Solid in green Reset Wi-Fi configuration
Sensor 1
Button
Off
Press and
hold the
button for 3
seconds
Activate the pairing state of sensor 1
Flashing in yellow Inactivate the pairing state of sensor 1
Solid in yellow Clear sensor 1 from controller
Sensor 2
Button
Off
Press and
hold the
button for 3
seconds
Activate the pairing state of sensor 2
Flashing in yellow Inactivate the pairing state of sensor 2
Solid in yellow Clear sensor 2 from controller
Sensor 3
Button
Off
Press and
hold the
button for 3
seconds
Activate the pairing state of sensor 3
Flashing in yellow Inactivate the pairing state of sensor 3
Solid in yellow Clear sensor 3 from controller
Installation
1.
Install application and add the device to witgarage app
1) Install witgarage app
Download the "witgarage" app from Google Play Store (Android) or Apple App Store (IOS).
Register:
If you do not have a witgarage account, register or sign in with a verification code sent by SMS or
E-mail.
Tap to enter registration page. The system automatically recognizes your country/area. You can also
select your country code manually. Enter your mobile phone number/email address and tap "Next".
If you choose the mobile phone number option, then enter the verification code in the message sent
to you by SMS. Set a password as prompted and press "Confirm" to finish your registration.