Product Description

太空船投影灯说明书 420x90 MM
Host button function description
Remote control instructions
Matters needing attention
Product description Instructions
Operating instruction for starlight of spaceship
Thank you for purchasing our products. This
product is an intelligent star projection
lamp,Hope to bring you romantic and good
product experience in the process of use;
Before using this product, please read this
manual carefully and keep it properly for
future reference.
1. Please make sure that the product does not
come into contact with water and corrosive liquid；
2. If you need to clean the product, please make
sure to disconnect the power supply；
3. Please use standard 5V 1A power adapter /
power bank, and other similar output USB ports.
Or may bring damage to the device.
WARNING:
Keep this Projection lamp out of reach
of children under 3 years.
Do not shine on the face for long time.
Package list
The spaceship Projection lamp
USB charging cable
Product description
Remote control
1PCS
1
PCS
1
PCS
1
PCS
On/OFF: Press once to open, and then press to
close. The operationis repeated;
LED light adjustment key: adjust the brightness
and darkness of RGB light;
Music button: Press once to open music, and
then click to close music. The operation is
repeated (the initial state is off closed state);
Up and down music adjustment button: Choose
build-in music songs;
Volume adjustment button: adjust the music
sound size；
Music rhythm button: When playing music, the
light will flash automatically;
Color gradient button: press once to turn on the
color light mode, and then press to turn off the
color light mode repeatedly;
Red and green special effect lights
superimposed button:
Press once to turn on the red and green lights at
the same time, press again to turn off the red and
green lights at the same time, the operation is
repeated, when it is turned on, the green light is in
breathing mode (the initial state is on)
Green special effect light button: Press once to
turn on the green light, and press again to turn
off the green light
Red special effect light button: Press once to
turn on the red searchlight, and press again to
turn off the red light;
Rotation/gear button: The rotation button
controls the turning on and off of the LED light,
the gear button adjusts the rotating gear (first
gear, second gear, third gear);
Timing key: Set the timing shutdown function of
the product, which can be set to turn off for half
an hour, one hour, one and a half hours, and two
hours, and there will be a reminder when you
click it.
LED light button: Press once to turn on, and then
press to switch on lighting effects (ten effects),
and then switch to ten kinds After the effect, click
again to turn off LED light (the initial state is the
first light effect (blue);
Product parameters
Name
Model
Rated power
Rated voltage
Product Size
Material
Spaceship Projection lamp
Spaceship Projection lamp
K-1069
4.7W
ABS+pc
165x101x88mm
!
Power button
Open the package, take out the product, and
connect the USB.
3. Music
Click the music button to turn on the built-in
music, click again to switch music, there are three
music in total, and turn off the music for the last
time，Press and hold to adjust the volume.
6. Music sync color changing
When the device connect phone by BT, press the
Music button, the light will flash with the music.
4. Lighting
Click to switch the light color, a total of ten
combinations. They are blue, red, green, white,
red-blue, red-green, blue-green, red-green-blue,
red-blue-white, and color switching. Press one
last time to turn off the light，press again to turn
off the light, then in cycle. Press and hold to
adjust light brightness.
5. Special effect lights
The red light and green light are on at the same
time when the machine is turned on, and the
green light is in a breathing state. Click to turn
on red light only,Press again to turn on only the
green light, and press again to turn off the light.
BT description:
BT name: EGOGO-3
BT connection instructions:
Turn on, the laser projection lamp works,
BT is automatically turned on, search for BT
EGOGO-3 on the mobile phone, and click
EGOGO-3 to match. At this time, the host has a
prompt sound and the operation is complete.
When the connection is disconnected, the host
also has a disconnect prompt sound.
2. Rotate
When the motor is turned on, the motor is in a
rotating state. Press once to adjust the rotation to
the second gear, press again to adjust the
rotation to the third gear, and press again to stop
the rotation.
1. Turn on
Press the power button, the light is turned on, the
color is blue, the two laser lights are turned on at
the same time, and the green light at Breathing
mode (Note: From the darkest to the brightest,
the time is 10s, and then from the brightest to the
darkest, the time is also 10s ). The motor rotates
at low speed when it is turned on.
ACHTUNG!
Außer Reichweite von Kleinkindern montieren.
ATTENTION!
Accrocher hors de portee des jeunes enfants.
WAARSCHUWING!
Buiten bereik van kleine kinderen hangen.
AVVERTENZA!
Appendi questo prodotto fuori dalla portata dei bambini
piccoli.
Precaución!
Colgar fuera del alcance de los niños.
CUIDADO!
Pendurar fora do alcance das crianças.
注意！
小さなお子様の手の届かないところにお越しください。
VOL+
VOL-
Music
rhythm
1H
2H
1.5H
0.5H
1 2 3
Fade
R+G
R G
Next songLast song
Music button
Volume increase
Volume down
Music rhythm button
Green special effect light
Red special effect lights
Rotate 1st gear, 2nd gear,
3rd gear button
Red and green special
effect lights superimposed
ON/OFF
LED light
Dimming up
Dimming low
Timing key
Color gradient
button