User Manual

4
3. Do not expose the headphone or any of its supplied parts to rain or other liquids.
Specifications
Bluetooth Version4.0
Bluetooth Profiles: HSP, HFP, A2DP and AVRCP
Connect with two Bluetooth devices at the same time
Operating Distance: up to 30 feet (10 meters)
Frequency responds range: 20 Hz~20 kHz
Play time: Up to 10 hours
Talk time: Up to 10 hours
Standby time: Up to 800 hours
Charging time: 3-4 hours
Dimension: ψ174*40.7*160mm
Weight: 162g
Support voice prompt for MMI:
Power on/power off/pairing/last number redial/connected/disconnected/voice dial/battery low
Correct disposal of this product
(Waste Electrical & Electronic Equipment)This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the purchase contract. This product should not
be mixed with other commercial wastes for disposal.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.