User Manual

Voice Dialing

Please ensure your mobile phone supports voice dialing function and the voice tag assigned for this

feature.

1. Press “VOL-” or “VOL+” Button for 2 seconds.

2. You’ll then hear a voice “Voice Dial”, say the name of the person you wish to call.

3. Press “VOL-” or “VOL+” Button for 2 seconds to stop the voice dialing.

Ending a call

Shortly press K1 Button once to end a call

Answering a call

Connected with one mobile phone:

Shortly press K1 Button once to answer a call.

Connected with two mobile phones:

1. Press K1 Button once to answer the second call but end the first call.

2. Press K1 Button twice to answer the second call and keep the first call.

3. Press K1 Button for 2 seconds to reject the second call but go on the first call.

4. Press K1 Button twice to transfer the two calls if the first mobile phone keep a call and the second mobile

phone answer a call.

Last number redialing

Connected with one mobile phone:

Press K1 Button twice to make the last number redial, and you will hear a voice “Last Number Redial”.

Connected with two mobile phones:

Press K1 Button twice to make the last number redial, and you will hear a voice “Last Number Redial”. This feature

will be available on only one mobile phone which is firstly connected with mobile phone.

Rejecting an incoming call

Press and hold K1 Button for 2 seconds to reject a call.

Transferring a call

Speaker to phone: Press and hold K1 Button for 2 seconds during a call, then release it.

Phone to speaker: Press and hold K1 Button for 2 seconds during a call, then release it.

Note: For different mobile phone setting, you could only transfer a call by press the mobile phone’s

keypad. Depend on your phone type, the actual operation may vary.

Muting the Microphone

You can put a call on hold by muting the microphone.

To turn on/turn off the Muting Microphone function: Press the “VOL+” Button and “VOL-” Button at the same time.

Delete the pairing records

When the headphone is on standby mode, press “VOL+” Button and “VOL-” Button for 5 seconds.

Storage of the headphone

1. Always store the headphone with the power off and make sure it is safely protected.

2. Avoid storage at high temperatures (above 60 ) such as in a ho℃ t vehicle or in direct sunlight. (Storage at high

temperatures can damage performance and reduces battery life).