User's Manual

3
BASIC OPERATIONS
Turn the headset on/off
Press and hold the Turn on/off button for 3 seconds and the blue
indicator light will flashes 3 times; Press and hold the Turn on/off
button for 3 seconds, the indicator flashes in red for 5 times.
Pairing with your Bluetooth phone
Pairing will create a unique and encrypted wireless link between two Bluetooth
enabled devices, such as your Bluetooth phone and Bluetooth headset.
1. Ensure that the headset is off (see Turning the headset on/off).
2. Press and hold the Turn on/off Button until the indicator light alternately
flashes blue and red (approximately 5 seconds).
3 Set your Bluetooth phone to discover the headset by following your phone's
guide. Typically, the steps involve going to a ‘Setup’, 'Connect', or ‘Bluetooth’
menu on your phone and then selecting the option to discover Bluetooth devices.
4. Your phone will find the “BTK-A31” headset and ask if you want to pair
with it. Confirm this by pressing the “Yes” or “OK” key.
5. Enter a passkey or PIN, 0000 (4 zeros), then press the “Yes” or “OK” key.
IMPORTANT: If pairing was successful, the indicator light will flash in blue 10
times rapidly before going to flashing every 5 seconds. If unsuccessful, the light
remains on, and you will need to re-attempt pairing.
Wearing the headset
Wear the headset on your ear. In general, you will get better performance when
there are no obstructions (including parts of your body) between the headset and
the phone. Depending on what ear you are going to wear the headset, simply
adjust the ear-hook accordingly.
Making a call
If the headset is off, turn it on now (see turn on/off section).
Using the phone’s keypad