User's Manual
5
Voice dialing from your headset
If your mobile handset is equipped with a dialing function, simply press the ON/OFF button on
your headset and when you hear a beep, say voice tag.
IMPORTANT: Please make sure to record voice tag into the mobile handset first before using
voice dialing function.
IMPORTANT: This function is only applicable to mobile handset with Bluetooth Handset profile.
Functionality varies depending on the mobile handset model you have. Please refer to your
handset user guide for additional information
Last Number Redialing from your headset
Press and hold the ON/OFF button for 2 seconds, you can repeat latest call.
IMPORTANT: This function is only applicable handsets with Bluetooth Handsfree profile.
Functionality varies depending on the mobile handset model you have. Please refer to your mobile
handset user guide for additional information.
Rejecting a call
When you receive a call, press and hold the volume down [-] for 2 seconds to reject the call.
Depending on your phone’s setting for type, you may only be able to mute the ringer or this
feature is not supported.
Switching off the microphone
While you are on a call, press the play/ pause button to switch off the headset’s microphone. To
switch it back on, press the button again (There is a beep each 7 seconds after microphone was
off)
TIP: In a noisy environment, the clearance of the voice quality would be better if you hold the
stereo headset and keep the distance 10 cm from you mouth.
Care and Maintenance
Headset
Consider turning your headset off before placing it in your pocket or bag. If the ON/OFF button is
accidentally depressed, your mobile handset may place an unintended call.