User's Manual
3
Low Battery
When Battery of the headset is low, there is a beep, and flashes in red instead of blue during
standby model.
Turning Your Headset On and Off
Turn on the headset
Press and hold the ON/OFF button for 3 seconds until you hear a short beep. The LED will flash
blue for 3 times.
IMPORTANT: Press the ON/OFF button again each time you turn on the headset to reactivate
pairing so that connection between the headset and the mobile headset is resumed. For pairing,
please refer to “pairing your headset”
Turning Off the headset
Press and hold the ON/OFF button for 5 second until you hear a long beep. The LED will flash
red for 3 times.
Pairing Your Headset
Prior to using your Bluetooth Stereo Headset for the first time, you must pair it with a
Bluetooth-enable mobile handset.
1. Place the headset and the mobile handset where they are easily viewable by no more than 1
meter apart.
2. Ensure the headset is OFF.
3. Press and hold the On/Off button for 4 seconds until the headset LED alternately flashes blue
and red.
4. Active your mobile handset’s Bluetooth function by referring to your mobile handset user
guide for details.
5. Set the mobile handset to search for Bluetooth devices with in about 1 meter, as instructed in
the mobile handset user guide and select “BTK-22” from the list.
6. Enter the preprogrammed passkey “0000” and press “OK” to pair your headset and mobile
handset. When the pairing is complete, the headset LED will flash blue.
7. Press: Return” to go back to your mobile handset’s main menu. For certain mobile handset
models, a headset icon will be shown on the screen. You should now be able to make and
receive calls using your headset.
IMPORTANT: If the pair cannot be completed within 1 minute while the pairing mode is
activated, the headset LED flashes blue each 1 second. Please repeat step 2 to 7 to pair the headset