User's Manual

ManualsBrandsShenzhen SHI KISB Electronic ManualsAudio EquipmentBLUETOOTH HEADSET

BTK-22 Stereo Bluetooth Headset User Manual

Thank you for purchasing the Bluetooth Stereo Headset BTK-22 we hope you will be delighted

with its operation.

Please read this user manual to get started, and to make the best use of the headset’s many

features.

Drive safety

Using a mobile phone while driving creates a distraction to the driver which may increase the

likelihood of an accident. When using the phone while driving, keep conversation short and do not

make notes or read documents. Before answering calls consider your circumstances. Pull off the

road and park before making or answering calls when driving conditions require (e.g. bad weather,

high traffic density, and presence of children in the car, difficult junctions or maneuvers)

Remember, driving comes first, not the call!

Abide by local laws.

BEFORE USING YOUR HEADSET

Getting to know your Bluetooth Stereo Headset

Summary of content (8 pages)

PAGE 1
BTK-22 Stereo Bluetooth Headset User Manual Thank you for purchasing the Bluetooth Stereo Headset BTK-22 we hope you will be delighted with its operation. Please read this user manual to get started, and to make the best use of the headset’s many features. Drive safety Using a mobile phone while driving creates a distraction to the driver which may increase the likelihood of an accident. When using the phone while driving, keep conversation short and do not make notes or read documents.
PAGE 2
Getting Started To use your Bluetooth Stereo Headset, please follow these simple steps: l Charge your headset l Pair your headset with a Bluetooth-enabled mobile handset Charging Your Headset Your headset uses a rechargeable battery. You must charge the battery fully before using the headset for the first time. Simply plug in provided USB cable to USB port then to USB Car Charger Adaptor / Notebook Computer / Desktop Computer. Headset will start charging.
PAGE 3
Low Battery When Battery of the headset is low, there is a beep, and flashes in red instead of blue during standby model. Turning Your Headset On and Off Turn on the headset Press and hold the ON/OFF button for 3 seconds until you hear a short beep. The LED will flash blue for 3 times. IMPORTANT: Press the ON/OFF button again each time you turn on the headset to reactivate pairing so that connection between the headset and the mobile headset is resumed.
PAGE 4
and the mobile handset again. Using Your Headset Play Press PLAY/PAUSE button while being connected to your Bluetooth audio device. Press PLAY/ PAUSE button while the music is stopped. The music automatically comes back after you ended a call if you answered a call while listening to music IMPORTANT: This function is only applicable to mobile handset with Bluetooth Handsfree Profile. Functionality varies depending on the mobile handset model you have.
PAGE 5
Voice dialing from your headset If your mobile handset is equipped with a dialing function, simply press the ON/OFF button on your headset and when you hear a beep, say voice tag. IMPORTANT: Please make sure to record voice tag into the mobile handset first before using voice dialing function. IMPORTANT: This function is only applicable to mobile handset with Bluetooth Handset profile. Functionality varies depending on the mobile handset model you have.
PAGE 6
l l l l l l l l Do not expose the headset to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaning solvents to clean the headset Do not expose the headset to extremely high or low temperatures. Do not dispose of the headset in a fire as it will result in an explosion Do not expose your headset your headset to contact with sharp objects as this will cause scratches and damage.
PAGE 7
l Ensure the headset is with in a maximum of 10 meters of your mobile handset(s) and there are no obstructions, such as walls or other electronic\ devices in between. If the above steps do not resolve your problem. Please recharge the headset and remove your mobile handset for a while. The Bluetooth Stereo Headset is compliant with and adopts the Bluetooth Specification V1.2.
PAGE 8
FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.