User's Manual

3. Set your Bluetooth phone to discover the headset by following your phone's

guide. Typically, the steps involve going to a ‘Setup’, 'Connect', or ‘Bluetooth’

menu on your phone and then selecting the option to discover Bluetooth devices.

4. Your phone will find the “BTK-A21” headset and ask if you want to pair

with it. Confirm this by pressing the “Yes” or “OK” key.

5. Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK”

key.

IMPORTANT: If the pairing can’t be completed within 90 seconds while the

pairing mode is activated, that meant the pairing was unsuccessful, please repeat

Step 1 to Step 5 to pair the headset and the mobile phone again.

Wearing the headset

Wear the headset on your ear. In general, you will get better performance when

there are no obstructions (including parts of your body) between the headset and

the phone. Depending on what ear you are going to wear the headset, simply

adjust the ear-hook accordingly.

Making a call

If headset is off, turn it on now (see Turning headset on/off section).

Using the phone’s keypad.

1. Dial number with keypad.

2. Press phone’s “send” key.

Using voice-activated dialing (after you’ve set up voice tags on your phone)

If your mobile phone is equipped with a dialing function, you can make a voice activated

call.

1. Short press K1 Button once.

2. You’ll then hear the voice-activation tone, say the name of the person you wish to call.

3. Short press K1 Button to stop the voice dialing.

Ending a call

l Short press K1 Button once