User's Manual

available on only one mobile phone which it’s firstly connected with the headset.

Note: Depend on your phone type, the actual operation may vary.

Rejecting an incoming call

Press and hold K1 Button for 2 seconds to reject a call.

Adjusting the volume

Press K2 Button to increase the volume level and press K3 Button to decrease the volume level.

You will hear a tone when volume level is maximum or minimum.

Transferring a call

Headset to phone: Press and hold K1 Button for 2 seconds when you are on the phone call. Then,

the phone call would be transferred from headset to phone.

Phone to Headset: Press and hold K1 Button for 2 seconds when you are on the phone call. Then,

the phone call would be transferred from phone to headset.

Note: For different mobile phone setting, you could only transfer a call by press the mobile

phone’s keypad. Depend on your phone type, the actual operation may vary.

Muting the Microphone

You can put a call on hold by muting the microphone.

To turn on/turn off the Muting Microphone function: Press the K2 Button & K3 Button at the same time.

Multipoint Function

Headset connected with two mobile phones at the same time.

1. When one phone is answering a call, the other one have a coming call, you should press K1 button once to

answer the call and hold the first call on or press K1 button for 2 seconds to reject coming call.

2. When one phone is answering a call, the other one is held on, you can press K1 button twice to transfer the

call between these two phones or press K1 button once to end current call and answer the call held on.

Storage of the headset

1. Always store the headset with the power off and make sure it is safely protected.

2. Avoid storage at high temperatures (above

60℃) such as in a hot vehicle or in direct sunlight.

(Storage at high temperatures can damage performance and reduces battery life).

3. Do not expose the headset or any of its supplied parts to rain or other liquids.

Product Specifications

Bluetooth Compliance: Bluetooth Version 3.0+EDR Specifications, Class II