User's Manual

Turning the headset on/off

1. To turn the headset on

Press and hold K1 Button for about 3 seconds, the blue indicator of the headset will flash 3 times rapidly. The

headset is now turned on.

2. To turn the headset off

Press and hold K1 Button for about 2 seconds, the red indicator will flash red 5 times rapidly. The headset will

be turned off.

3. When the blue indicator flashes red during standby mode, it means the headset is on low

battery, please charge the headset.

Pairing

Pairing will create a unique and enciphered wireless link between two Bluetooth enabled devices,

such as your Bluetooth phone and Bluetooth headset.

1. Ensure that the headset is off (see “To turn the headset off” section).

2. Press and hold the K1 Button for about 5 seconds until the indicator light alternately flashes

blue and red.

3. Set your Bluetooth phone to discover the headset by following your phone's guide. Typically,

the steps involve going to a ‘Setup’, 'Connect', or ‘Bluetooth’ menu on your phone and then

selecting the option to discover Bluetooth devices.

4. Your phone will find the “BTK-725” headset and ask if you want to pair with it. Confirm this by

pressing the “Yes” or “OK” key.

5. Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK” key.

IMPORTANT: If the pairing can’t be completed within 90 seconds while the pairing mode is

activated, that means the pairing is unsuccessful, please repeat Step 1 to Step 5 to pair the

headset and the mobile phone again.

Pairing Your Headset with Two Mobile Phones (Multipoint connecting)

BTK-725 supports a Multipoint function to allow simultaneous pairing of the headset with two

mobile phones.

1. Follow the pairing procedure as instructed in “Pairing” section to pair the headset with the

first mobile phone.

2. Turn off the headset.

3. Repeat the same pairing procedure on the second mobile phone.