User's Manual

Checking the accessories

Make sure you have the following items with your headset: Travel adapter,

Manual, Ear-hook.

Charging the headset

Your headset uses a rechargeable battery. You must charge the battery fully

before using the headset for the first time.

1. Plug the travel charger into an AC socket.

2. Connect the charger with headset as shown on the picture. The red indicator

of headset will turn on when charging.

3. When the battery is fully charged, the red indicator will change to blue.

1) Depending on your country, the travel adapter may appear different from the

above illustration.

2) When the headset is in low battery, the headset will flash red.

3) The headset will be fully charged in approximately 1-2 hours.

4) Remove the travel adapter from the AC socket.

WARNING: Do not attempt to charge the headset with anything other than the

travel adapter provided. Using unauthorized travel adapter may damage the

headset.

IMPORTANT: The headset cannot be used while charging.

BASIC OPERATIONS

Turning headset on/off

1. To turn the headset on

Press and hold K1 Button for about 4 seconds, the blue indicator of the headset will flash 3

times rapidly. The headset is now turned on.

2. To turn the headset off

Press and hold K1 Button for about 3 seconds, the red indicator will flash red 5

times rapidly. The headset will be turned off.

3. When the blue indicator flashes red, it means the headset is on low battery,

please charge the headset.