User's Manual

3
feature will be available on only one mobile phone which is firstly connected with mobile phone.
Rejecting an incoming call
Press and hold “MFB” Button for 2 seconds to reject a call.
Transferring a call
Headset to phone: Press and hold “MFB” Button for 2 seconds during a call, then release it.
Phone to headset: Press and hold “MFB” Button for 2 seconds during a call, then release it.
Note: For different mobile phone setting, you could only transfer a call by press the mobile phone’s
keypad. Depend on your phone type, the actual operation may vary.
Muting the Microphone
You can put a call on hold by muting the microphone.
To turn on/turn off the Muting Microphone function: Press the “VOL+” Button and “VOL-” Button at the same time.
Delete the pairing records
When the headset is on standby mode, press “VOL+” Button and “VOL-” Button for 4 seconds.
Adjust the EQ
When the headset is on play mode, press “NEXT” button for 2 seconds, it will switch circularly among “normal”,
“bass”, “treble”.
Storage of the headset
1. Always store the headset with the power off and make sure it is safely protected.
2. Avoid storage at high temperatures (above 60℃) such as in a hot vehicle or in direct sunlight. (Storage at high
temperatures can damage performance and reduces battery life).
3. Do not expose the headset or any of its supplied parts to rain or other liquids.
Product Specifications
Bluetooth Version4.0
Support Bluetooth HSP, HFP, A2DP and AVRCP Profiles
Connect with two Bluetooth devices at the same time
Micro USB charging port
Operating Range: up to 30 feet (10 meters)
Frequency responds range: 2.402-2.48GHz
Play time: 5 hours
Talk time: 5 hours
Standby time: 120 hours
Setting bass boost
Indicate the battery of the speaker on iPhone products
Support voice prompt for MMI:
Power on/power off/pairing/last number redial/connected/disconnected/voice dial/battery low
Correct disposal of this product