User's Manual
Table Of Contents
- BTK-12 Bluetooth TM Headset User Manual
- Bluetooth Wireless Technology
- Mini Bluetooth Headset
- Features
- Box content and Picture
- Turning the Headset On or Off
- Pairing the Headset
- Making and Answering/Ending Calls
- Making Calls
- Answering Calls and Ending Calls
- Mute
- Connect with a PC or PDA
- Low Battery
- Trouble Shooting
- Product Maintenance
- Travel charger
- Battery Information
- About Pairing
- Bluetooth Passkey
- Reset
- Warranty Card
-Use only a clean soft cloth to clean your Headset.
-When the Headset is not in use, always keep it in its case.
-Do not allow children to play with your Headset, as they may injure themselves and damage the Headset as well.
-Do not place the Headset in an extremely hot or cold temperature, when the Headset will not be used for a while.
Travel charger
The charger is designed for indoor use only. Do not use it outdoors.
The charger must be connected to the designated power sources as marked.
When removing the charger from an outlet, never pull the charger cord, as it may damage the charger.
Battery Information
New Batteries
For first time use, plug the adapter into the Headset and charge it at least 2 hours until the red indicator turns off.
Battery care
-Only qualified Service Centers are authorized to remove or replace the battery.
-The rechargeable battery has a long service life if treated with care.
-The battery can only be charged in a temperature range of 10℃to 45℃.
-Use the battery in room temperature for maximum battery capacity.
-The battery capacity may be reduced if operation in a cold environment.
-The Headset has to be recharged every two months, when it is not in use during a long time.
About Pairing
What is pairing
Pairing is a process or associating Bluetooth devices with each other, It will establish a permanent security link between the
devices and enable and enable quick access to the services provided without need to enter passkeys.
Bluetooth Passkey
Each mini headset has a default passkey 0000 for pairing, which is stored in its internal memory. You are usually required to
enter the passkey 0000 in a pairing process with a Bluetooth mobile phone or other devices, however it depends on the kinds of
Bluetooth device. Please refer to the users’ manual of the devices for the specific operation.
Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or the service stopped
-One or both devices are restarted.
Reset
If for any reason that the headset remains non-function, it may be reset by the following method:
Please turn off the headset, check if the battery is already run down. If it is, you just need to charge the battery or change a new
battery. If not, please delete the paired information records on your mobile phone, and re-pair and re-connect with the mobile
phone again.
Warranty Card
(A)