User's Manual

Important Information
Trouble Shooting
1.The red LED indicator flashes
It indicates that the Headset is running low on battery. Charge the Headset or change a new battery as soon as possible.
2.The Headset cannot be activated after being charged for 20 minutes.
To activate the Headset, it needs to charge the battery at least for 40 minutes. It is highly recommended to fully charge the battery
before use.
3.No indication of charging is shown.
For the Headset battery that is empty or has not been used for a long time, it may take some minutes for the Headset indicator to
show charging status with a steady red light.
4.No sound can be heard from the Headset.
-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two-paired devices are within 10 meters range.
-Make sure that the your mobile phone is within strength signal place.
-Some Bluetooth mobile phones can support only one Bluetooth Headset. Disconnection may happen when there are more than
one Headset paired with your mobile phone.
Frequently Asked Questions:
1.My Bluetooth Headset charge fully and power is on, why my mobile phone and Headset can’t work normally?
-You must make sure whether your mobile phone is with Bluetooth function and whether the pairing is completed.
2.Is Bluetooth Headset charge fully and power is on, why my mobile phone and Headset can’t work normally?
-No, Bluetooth Headset match only mobile phone with supporting Headset & hands free profile Bluetooth function.
3.What is the operation distance between the Headset and a Bluetooth mobile phone?
-It is up to 10 meters.
4.When my headset and mobile phone are pairing, why are other Bluetooth devices found in my mobile phone.
-When Bluetooth function mobile phone is pairing, if there are others Bluetooth devices (for example: PDA, NB) will be
searched together. It could be “BTK-12” or “Unknown Device”.
5.Why can’t my mobile phone discover my Bluetooth Headset when is pairing?
–If your Headset can’t be discovered. Please set the Headset in pairing mode before pairing. (Refer to “Headset Pairing ”for
details.)
6.Is the pairing required between mobile phone and Headset every time before using?
-No, The pairing is required a time only between mobile phone and Headset; afterwards the pairing isn’t required any more
whatever any of the devices is powered off.
7.Why is there noise in my Bluetooth Headset?
Headset call quality affected by following two factors:
-If your mobile phone local signal is very weak, the Headset call quality is bad relative too
-Noise become bigger too if the distance exceeds the standard between the mobile phone and Headset.
8.How do I do if the Headset can’t hear clearly?
-Adjust the mobile phone volume or press K1 button of the Headset to increase volume, at the same time look at your mobile
phone whether is in signal strength place.
9.Why can’t my Headset use suddenly?
-It is possible that the Headset doesn’t have electricity, the red indicator will flash when the Headset do not have electricity.
10.Why can’t my Headset use suddenly?
-You must record your voice by Headset, before using voice dialing.
Product Maintenance
-Use of non-original accessories may result in performance deterioration, injury, products, damage, electronic shock, and
warranty termination.
-Attempt to disassemble your Headset may damage it, and the warranty will be void.
-Do not put the Headset in a dusty place.