User's Manual
Table Of Contents
- BTK-12 Bluetooth TM Headset User Manual
- Bluetooth Wireless Technology
- Mini Bluetooth Headset
- Features
- Box content and Picture
- Turning the Headset On or Off
- Pairing the Headset
- Making and Answering/Ending Calls
- Making Calls
- Answering Calls and Ending Calls
- Mute
- Connect with a PC or PDA
- Low Battery
- Trouble Shooting
- Product Maintenance
- Travel charger
- Battery Information
- About Pairing
- Bluetooth Passkey
- Reset
- Warranty Card
Getting Started
Charging Battery
The Headset comes with a replaceable and rechargeable battery included, you can charge the battery independently or with the
headset. The battery is not fully charged when it is new. For first time use, it takes 2 hours to fully charge the battery. Afterwards,
it will take about 1 hour to fully charge the battery. With the battery fully charged, the talking time will be 6 to 8 hours, and the
stand-by time will be about 200 hours.
1. Plug the travel charger into an available AC supply socket (You are suggested not to use the vehicle charger for the first
time.).
2. Connect the charger with headset as shown on the picture. The red indicator of headset will turn on when charging. At the
same time, the red Indicator on the charging cable will turn on.
3. When the battery is full, the red indicator of the headset and also the red indicator on the charging cable will turn off.
Buttons Function
K1 button: Power on/off; Answer calls; Paring; Voice dialing
K2 button: Increase volume
K3 button: Decrease volume; Recall
-Press K2 and K3 at the same time: Mute function
Turning the Headset On or Off
1.To turn the headset on
Press K1 button for about 8 seconds, you will hear two high tongs , and the blue indicator of the Headset will flash. The headset
is now turned on.
2.To turn the Headset off
Press K1 button for about 3 seconds, you will hear two Low tongs , The Red indicator of the Headset will flash quickly several
times, and then the Headset will turn off.
3.When the red indicator flashes slowly, it means the headset energy is not enough, And Headset remind by “DU, DU” sound.
Pairing the Headset
You are required to pair the Headset with your mobile phone before using the Headset.
Step1: The Headset must be powered off before initiating pairing. When initiate pairing, Keep pressing K1 button for 11 seconds
until blue and red indicator of the Headset flash alternately.
Step2: Initiate pairing process on your Bluetooth mobile phone to pair the Headset. (Detailed steps please refer to Mobile