User's Manual

Headset call quality affected by following two factors:
-If your mobile phone local signal is very weak, the Headset call quality is bad relative too
-Noise become bigger too if the distance exceeds the standard between the mobile phone and Headset.
12.How do I do if the Headset can’t hear clearly?
-Adjust the mobile phone volume or press K2 button of the Headset to increase volume, at the same time look at your mobile
phone whether is in signal strength place.
13.Why can’t my Headset use suddenly?
-It is possible that the Headset doesn’t have electricity, the red indicator will flash when the Headset do not have electricity.
14.Why can’t my Headset use suddenly?
-You must record your voice by Headset, before using voice dialing.
Product Maintenance
-Use of non-original accessories may result in performance deterioration, injury, products, damage, electronic shock, and
warranty termination.
-Attempt to disassemble your Headset may damage it, and the warranty will be void.
-Do not put the Headset in a dusty place.
-Use only a clean soft cloth to clean your Headset.
-When the Headset is not in use, always keep it in its case.
-Do not allow children to play with your Headset, as they may injure themselves and damage the Headset as well.
-Do not place the Headset in an extremely hot or cold temperature, when the Headset will not be used for a while.
Travel charger
The charger is designed for indoor use only. Do not use it outdoors.
The charger must be connected to the designated power sources as marked.
When removing the charger from an outlet, never pull the charger cord, as it may damage the charger.
Battery Information
New Batteries
For first time use, plug the adapter into the Headset and charge it at least 4 hours until the red indicator turns off.
Battery care
-Only qualified Service Centers are authorized to remove or replace the battery.
-The rechargeable battery has a long service life if treated with care.
-The battery can only be charged in a temperature range of 10℃to 45℃.
-Use the battery in room temperature for maximum battery capacity.
-The battery capacity may be reduced if operation in a cold environment.
-The Headset has to be recharged every two months, when it is not in use during a long time.
About Pairing
What is pairing?
Pairing is a process or associating Bluetooth devices with each other, it will establish a permanent security link between the
devices and enable and enable quick access to the services provided without need to enter passkeys.
Bluetooth Passkey
Each mini headset has a default passkey 0000 for pairing, which is stored in its internal memory. You are usually required to
enter the passkey 0000 in a pairing process with a Bluetooth mobile phone or other devices, however it depends on the kinds of
Blurtooth device. Please refer to the users’ manual of the devices for the specific operation.
Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or the service stopped
-One or both devices are restarted.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE
THE EQUIPMENT.