User's Manual

Getting Started
Charging Battery
The Headset comes with a rechargeable battery included. The battery is not fully charged when it is new. For first time use, it
takes 4 hors to fully charge the battery. Afterwards, it will take about 1 hour to fully charge the battery. With the battery fully
charged, the talking time will be 5 to 6 hours, and the stand-by time will be about 140 hours.
1. Plug the travel charger into an AC socket.
2. Connect the charger with headset as shown on the picture. The red indicator of headset will turn on when charging.
3. When the battery is full, the red indicator of the headset will turn off.
Buttons Function
-K1 button：Power ON/OFF, Answer calls, Pairing, Voice dialing;
-K2 button: lncrease volume
-K3 button: Decrease volume, recall
Turning the Headset On or Off
1.To turn the headset on
Press K1 button for about 8 seconds, you will hear two high tones, and the blue indicator of the Headset will flash. The headset is
now turned on.
2.To turn the Headset off
Press K1 button for about 3 seconds, you will hear two Low tones , The Red indicator of the Headset will flash quickly several
times, and then the Headset will turn off.
3.When the red indicator flashes slowly, it means the headset energy is not enough, And Headset remind by “DU, DU” sound.
Pairing the Headset
You are required to pair the Headset with your mobile phone before using the Headset.
Step1: The Headset must be powered off before initiating pairing. When initiate pairing, Keep pressing K1 button for 8 seconds
until blue and red indicator of the Headset flash alternately.
Step2: Initiate pairing process on your Bluetooth mobile phone to pair the Headset. (Detailed steps please refer to Mobile
phone manual). After research complete, you will find a new device named “BTK-10” in the list of the Bluetooth.
Step 3: You will be required to input Pin-code. Please input the Headset Pin-code:0000 and carry out Pairing Process.
(Note:0000 is a default Pin-code pre-stored in the Headset).
Notes:
1. If the Headset is not in pairing mode, your mobile phone won’t find the headset. Please set the Headset into pairing mode
before letting your Mobile Phone research for the Headset.
2. The Headset Pair mode will continue about two minutes, the Headset will automatically power off if pairing can’t be
completed within the time. So you must repeat steps 1 to 3 until Pairing succeeds.
Making and Answering/Ending Calls
Once the Headset is successfully paired with your phone, you can use the Headset to make and receive calls. The Headset can be
used with voice dialing if your phone supports this function. For detailed operation on voice control, please refer to the user
manual of your mobile phone.
Making Calls
1. Using voice dialing
Press K1 button, waiting for a beep and say the name of the person whom you want to call.
2. Using mobile phone keys to make a call.
Dial the number on the mobile phone as you normally do. Once the call has been set up, the sound will be transmitted to your
Headset automatically.
3. Repeat call
Press K3 button long time, you can repeat latest call.