User's Manual

5
Enhanced features (for Bluetooth phones with hands-free profiles)
Enhanced features are available for phones that support the hands-free Bluetooth profile.
Check your phone’s instruction guide or contact the phone manufacturer if you are not sure
if your phone supports the hands-free Bluetooth profile.
Once you’re done pairing, the following headset features will be available:
l Last number redial
While the headset is on, press and hold Volume Control Button [ - ] for 3 seconds and
then release..
l Rejecting an incoming call
When you receive a call, press and hold the Multi-Function Button for 3 seconds to
reject the call. Depending on your phone’s setting or type , you may only be able to mute
the ringer or this feature is not supported.
l Adjusting the volume
Press Volume Control Button [ + ] on the side of the headset to increase the volume level and
press Volume Control Button [ - ] to decrease the volume level.
l Answering a second call*
When your phone notifies you of another incoming call while you are on a call, press and
hold the Multi-Function button for 2 seconds. You can switch between calls by pressing and
holding it for 2 seconds.
*Depending on your phone, this feature is not supported.
l Placing a call on hold*
While you are on a call, press and hold the Multi-Function button for 2 seconds. To retrieve
the call, press and hold the Multi-Function button for 2 seconds again.
*Depending on your phone, this feature may not supported.
Making a call
If headset is off, turn it on now (see Turning headset on/off section).
Using the phone’s keypad.
1. Dial number with keypad.
2. Press phone’s “send” key.
Using voice-activated dialing (after you’ve set up voice tags on your phone)
1. Press and release Multi-Function Button once.
2. You’ll then hear the voice-activation tone; say the name of the person you wish to call.
! NOTE: Record voice tag from headset for better reception.