Product Manual

风琴折 65x90mm
Product Features
3
Qi-enabled watches:Only compatible with Apple watch 2 generation and
above series magnetic watches,Place the watch on the wireless charger,it will
automatically align, accurately adsorb to the watch, and start wireless
charging.
1. Built in magnets,can be magnetically attached to the back of
mobile phone and watch for easy use;
1.Do not squeeze or collisions.
2.Do not disassemble or throw into fire or water, to
avoid cauing a short circuit leakage.
3.Do not use the wireless charger in high temperature,
humidity or corrosive environment,avoid damaging
the circuit and avoid leakage.
6.Take care of the children,to ensure that they won't
play the wireless charger as a toy to avoid
unnecessary accidents.
4.Do nof close with magnetic stripe or chip care (ID
card,bank card ,ect)to avoid magnetic failure.
5.Please keep the distance at least 20cm between
implantable medical devices (pacemakers.implantable
cochlear,etc)and the wireless charger ,to avoid
potential interference with the medical device.
2. This is a ultra-thin, small size product and convenient to carry;
3. This product is an integrated wireless charger, not need
additional cable;
4. Data line input port specification is USB-C, supporting PD
protocol;
5. Charging power: mobile phone 15W quick charging, earphone
5W, watch 3W.
6. The bottom of the product is designed with a circle non-slip
silicone pad,which can prevent falling off when placed on the
smooth table.
Input
Output
Frequency
Efficiency
Product Size
Product Specification
Attention
NOTE:No power adapter.If you need,please
purchase separately.
9.0V 2.0A
15W(Max)
110-205KHz
75%
58.7*8mm
The upgraded version magnetic wireless charge is
compatible with three different wireless charging
devices.
Operational Methods
1
Qi-enabled mobile phones:Place the magnetic attraction mobile phone on
the wireless charger, and the built-in magnet of the wireless charger will
automatically align, accurately adsorb to the mobile phone, and start wireless
charging;For other mobile phones without magnetic attraction function, can
be charged wirelessly by placing the center position of the mobile phone in
the wireless charger s center position.
‘
‘
2
Qi-enabled earbuds:Place the earbuds(with wireless charging case) in the
wireless charger s center position to start wireless charging.
Thanks for choosing us!
This is a 3 in 1 magnetic wireless charging pad, which is compatible
with mobile phones, earbuds and watches with wireless charging
function. please read the manual carefully before using the product,
and keep properly for checking.
Product Introduction
Product Manual
AP06
3 in 1
Magnetic Wireless Charging Pad
MADE IN CHINA
Phone/Earbuds/Watch