Product Specs

(4) Custom alarm temperature function
The initial value of the custom temperature setting is 50°C (122°F). If you need to adjust the
temperature, press and hold the PROBE button for 3 seconds to enter the setting, and then press ▲▼ to
increase/decrease the alarm temperature value. Long press for fast increase/fast decrease, and finally
Press TASTE to confirm or automatically confirm after 10 seconds.
(5) ℃/℉/ （Fahrenheit and Celsius switch; On/off）
When the device is off, press the button to turn it on; when it is on, press the ℃/℉ button to
switch between Fahrenheit and Celsius. Long press for 3 seconds to shut down the device.
(6) HOUR/▲ ; MIN/ ▼ ; START/STOP
Press the HOUR button to increase the hour, the maximum is 23 hours
Press the MIN button to increase the minute, the maximum is 59 minutes
After setting the time, press the START/STOP button to start the countdown. During the countdown,
you can press the STOP button to pause, and then press to continue.
When there is no time setting (00:00:00), press START to start counting. During the countdown, you
can press the STOP button to pause, and then press to continue.
When the timing is paused, press HOUR and MIN at the same time to clear the value.
Function description of the receiver
(1) BBQ temperature alarm
When the received temperature is higher than or equal to the set temperature, the device will
immediately alarm.
Temperature alarm: BB alarm sounds, the measured temperature flashes and the backlight lights up
orange for 10 seconds. The alarm will stop after 30 seconds, but the measured temperature will continue
to flash. After one minute, the device will alarm again for 10S; every minute it will alarm for 10S until the
measured temperature drops, and the alarm will be released.
During the alarm, press any button to cancel the alarm sound, but the measured temperature will
continue to flash until the temperature drops.
Alarm mode: BB-BB-BB-BB (two beeps per second)
When two or more probes alarm at the same time, the corresponding temperature of the probe will
flash, and the alarm time is calculated based on the alarm time of the last probe.
(2) Timer: It can work independently without connecting temperature probe.
The settable time range is 23 hours, 59 minutes, 59 seconds
When the time is 00:00:00, press the START button to start counting, and “: ”flashes.
When the countdown is running, the screen displays （an hourglass）and “: ” flashes.
When the countdown time is reached, the device alarms, the hourglass and “00:00:00 ” will flash.
Alarm time: the alarm will stop after one minute, and the display will return to the previously set time.
Bright orange backlight for 10 seconds.
Alarm mode: B-B-B-B (one beep per second)
Press any button during alarm to cancel the alarm sound, but the time continues to flash.