User Instructions

1. APP connection identity: The icon always lights up when the APP is connected.
2. External temperature indicator: The icon is displayed when the external temperature is
displayed on the screen. ( The internal and external temperatures can only be changed while
cooking).
3. Probe Low Charge: The icon flashes when the probe charge is less than 15%.
(Only if the probe is connected)
4. Internal temperature indicator: The icon is displayed when the internal temperature is
displayed on the screen.
5. Power: The icon flickers when the power is less.
6. Unit: Display the corresponding unit of temperature.
7. Temperature display area: Display the temperature (The internal temperature from
-10 degrees Celsius to 100 degrees Celsius. The external temperature is from 50 degrees Celsius
to 260 degrees Celsius.)
External temperature:
This is the measurement range of the external temperature: from 50 degrees Celsiu to 260
degrees Celsius. This is exposed to the oven with a maximum temperature of 300 degrees
Celsius.
Safety line:
When cooking food, the section of below the safety line must be inside of the food. The section
of below the safety line is forbidden to be exposed to high temperatures (which will cause
permanent damage to the equipment)!
Internal temperature:
The area is below the safety line, and it is necessary to ensure that the area is wrapped in food when used in
high-temperature environments (less than 100 degrees Celsius). The measurement range of this area: from -10
degrees Celsius to 100 degrees Celsius.
Note:
In order to ensure that the connection is not easy to disconnect, make sure that the distance between the
charging case and the probe is less than 1M!
Steps to use:
1. Long press key 3S to turn on the device.
2. Check whether the probe power flickers or not, and if yes, keep the status until not
flashing, then go to next step.
3. Remove the probe and wait for the 10S. The display area shows from the icon "--" to