User's Manual

ManualsBrandsShenzhen Shadow Crown Technology ManualsAudio EquipmentSoundbar

80mm

120mm

Safety introduction

Trouble clearing

Remote control introduction

User Manual

Notice:

Do not mix old and new batteries in the remote control, so

as not to affect the remote control operation due to

insufficient power;

If the remote control is not used for a long time, please

remove the battery to prevent battery leakage from

corroding the remote control.

Body instruction

Wall mounting instruction

Bluetooth mode

Audio source input mode

Optical fiber mode

Basic parameter

Digital tube

display screen

Power switch

Mode switch

Click: volume -

Long press: prev song

Click: volume +

Long press: next song

Mute

Play/Pause

Wall bracket Wall bracket

Power port USB disk port

Audio source

input port

Optical fiber port

Click mode switch mode selection: bluetooth

mode, USB disk mode, optical fiber mode,

audio source input mode

Play music files on USB storage devices from

the device.

（1）Connect the USB stick to your device on

the back of the device.

（2）Press the body " " to switch the USB

disk mode or press" USB "on the remote

control to enter the USB disk mode. If the

USB disk is detected, music will

automatically play .

USB disk mode

*USB only U disk read, temporarily do not support

other USB devices.

*It is recommended to put music files in the root

directory.

Rated power

Frequency response

Sound channel

Input

RST

DC IN AUX OPTICAL USB

（1）Use analog cables to connect AUX port (3.5mm

jack) on sound bar to AUX/ 3.5mm ports on

portable devices.

（2）Press " " on the body to switch the audio input

mode or" AUX "on the remote control to enter the

audio input mode.

AUX

cable

（1）Fiber optic connection supports digital

audio, which can replace HDMI for audio

connection;

（2）Switch the optical fiber mode by pressing

body " " or press "OPT" on the remote

control to enter the optical fiber mode.

OPTICAL

Note: please refer to the fiber output equipment

manual to switch the output equipment to

fiber mode.

USB

DC 18V-2A

60Hz-200KHz

2.0

Power switch

Prev song

Next song

Mute

Play/Pause

Stop/Play

Reset equalizer

USB disk play

mode switch

Equalizer mode

Volume- Volume+

USB disk

Optical fiber

mode

Audio source

input mode

Bluetooth mode

According to the product back hook spacing,

the corresponding position on the wall hook

accessories installed.

（1）Only use accessories specified or provided by the

manufacturer (such as special power adapter,

remote control, etc.);

（2）To reduce the risk of fire or electric shock, protect

the device from dripping or splashing, and stay

away from objects filled with liquid, such as vase;

（3）In order to prevent injury, the device must be

firmly fixed to the wall according to the

installation instructions;

（4）Do not open the machine by yourself, or the

company will not undertake free quality

guarantee service;

（5）When the device is not in use for a long time,

please turn off the power and unplug the power

adapter;

（6）Do not install equipment near a heat source, such

as a radiator, heat recorder, furnace, or other heat

generating equipment (including amplifiers);

（7）The equipment should be used in mild weather;

（8）Do not use abrasive cleaning solvent to clean the

equipment. Only use dry cloth.

（9）If the product is found damaged, please do not

try to repair it by yourself, please contact the

dealer;

（10）To prevent hearing damage, do not turn up the

volume for a long time or suddenly.

（1）Press body " " to switch bluetooth mode

or" BT "on the remote control to enter

bluetooth mode;

（2）Select "M1 soundbar" to pair with the device.

Step: set > bluetooth >M1 soundbar >

paired successfully.

DC power port/optical fiber/

audio input/USB/bluetooth

872 x 98 x 70mm

1.7KG

Product size

Product net weight

If you have problems using this product, please

check the following points before requesting

service:

（1）System

Device failed to start

• Check if the power cord is plugged into the

socket and sound bar

（2）Sound

①The device has no sound

• Make sure the device is not set to mute;

• Use the remote control to select the correct

audio input source;

• Connect your sound bar to a TV or other

device via an audio cable

②Strange sound after adjusting the sound setting

• Press " " on the remote control to reset the

equalizer to reset your sound bar to factory

Settings.

③The sound is distorted or echoing

• When playing audio from your TV through

sound bar, make sure the TV is set to mute.

（3）Bluetooth

①The source device could not be connected to

the sound bar

•You have not enabled bluetooth on the source

device.Refer to the user manual for the source

device to enable this feature.

• Restart the bluetooth device and try to match

with the sound bar.

②The audio playback quality of the connected

bluetooth device is poor.

• Bluetooth reception is bad.Place the source

device near the sound bar, or remove any

obstacles between the source device and the

sound bar.

③Bluetooth device connections are intermittent.

• Bluetooth reception is bad.Place the source

device near the sound bar, or remove the

barrier between the bluetooth device and the

sound bar.

• Some bluetooth devices may automatically turn

off the bluetooth connection to save power,

this is not a bug.

（4）Remote control

The remote doesn't work properly

• Check if the battery is depleted and replace it

• If the remote control is too far away from the

main device, move it closer to the main device

*FCC Warning Statement

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment. This

equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This

equipment generates uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not

occur in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

‐‐ Reorient or relocate the receiving antenna.

‐‐ Increase the separation between the equipment

and receiver.

‐‐ Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

‐‐ Consult the dealer or an experienced radio/TV

technician for help.