User's Manual

Operating Guide
Step 1
Charging
the Device
The Dog Training Collar use Lithium-Polymer batteries. DO NOT charge the
device near any flammable substances. Fully charge the Remote Transmitter
and Collar Receiver before use.
Charge the Dog Training Collar if:
There is only 1 battery level bar left on the Remote Transmitter LCD
display.
The indicator light on the Collar Receiver will not come on.
Charge the Remote Transmitter
1. Connect the USB cable connectors to the charging jack on Remote
Transmitter.
2. Connect the USB cable port to the power adapter, power band or your PC.
3. The battery icon on the LCD display will scroll when charging.
4. Charge the transmitter at least 2 hours for first charge or until indication
that charging is complete.
5. When charging is complete, the battery capacity indicator will not flash
any more.
6. When battery capacity “ ” indicator is empty, please charge it ASAP.
Note: Approximate battery life is 6 months after fully charged, depending
on frequency of use.
Collar Receiver
LED Indicator
Power ON/OFF /
Encode Button
Power ON/OFF / Encode Button:
Turn On/Off the Collar Receiver.
Hold it for a 3 seconds to encode the receiver UNDER THE SHUT
POWER OFF STATE.
LED Indicator:
In “Standby” status, the LED light will flash green every 5 seconds, will
flash red when the battery at the low power mode (please charge it ASAP).
• When Charging, the LED light is red. It will turns to green when fully charged.
Charging Port: For Collar Receiver charging.
Rubber Cover: After completion of charging. Please put the cover in
place to safe guard the internal unit from dust and water.
Conductive Probe Cover: Avoid the injury to the dog’s skin because
of the friction of metal contact point.
Contact Points: Deliver vibration and static shock (with Stainless Steel
Probe).
Notes: The hexagon hole on the Test Bulb
can be used to fasten or unfasten
the Probes to contact points.
Charging Port
(with Rubber Cover)
Contact
Point
Stainless
Steel
Probe
Conductive
Probe Cover
Definition of the Product
9 10