User's Manual

Definition of the Product
Remote Transmitter
Vibration
Shock
Tone
Channel Select / Lock
Level Down
Level Up
A
B
Shock Level
Warning
Vibration Level
Tone
Channel
Battery StateLock
A
B
LCD Screen: Display the channel, intensity and battery fuel gauge.
Channel Select / Lock Button
• Press the button to select Channel A, Channel B or public channel A+B.
• Press and hold the button to Lock or Unlock the intensity level of vibration
or shock.
Level Up/Down Button
• Set the level of Static Shock and Vibration.
(WARNING: ALWAYS BEGIN WITH A LOW LEVEL SETTING IN THE
INITIAL TRAINING STAGES.)
• If you want to set the level of vibration or static shock, please press the
corresponding button first. The corresponding icon show on the display
will flash 2 times. Now you can adjust the level by pressing the Up/Down
button.
Tone Button: When it is pressed, the Collar Receiver will give a warning
beep.
Vibration Button: When it is pressed, the Collar Receiver will vibrate,
levels can be adjusted from 0 to 8 by pressing the Up/Down Button after
pressing the Vibration Button.
Shock Button: When it is pressed, the Collar Receiver will issue the
shock. Static shock levels can be adjusted from 0 to 16 by pressing the
Up/Down Button after pressing the Shock Button.
Charging Hole: For remote transmitter charging.
Charging Hole
7 8