Safety Information

1. Press / / once to send a beep, vibration and shock
command to Receiver Collar. The corresponding icon on the
LCD display will flashing.
3. Press the Channel/Lock button to select channel 1 ,
channel 2 or channel 3 .
4. Press the Level UP / DOWN Buttons to adjust the Vibration
Level . Level 1 is the weakest and level 8 is the strongest.
Level 0 indicates no Vibration.
5. Press the Level UP / DOWN Buttons to adjust the Shock
Level . Level 1 is the weakest and level 16 is the strongest.
Level 0 indicates no Shock.
Notes: Starting at Level 1 on the digital display. If your pet shows
no reaction, moving up to the next level. LCD display will shown
warning icon at Level 8-16.
Your pet should not vocalize or panic when receiving stimulation.
If this happens, the shock level is too high and you need to go
back to the previous level.
6. Press and hold the Channel/Lock button to locked the level
of Vibration and Shock. The LCD will displayed the icon “ ”.
To Adjust the level of Vibration and Shock, press and hold the
Channel/Lock button again to unlocked.
7. If the Remote Transmitter left unused for 6 seconds, backlight will
be off and enter into “STANDBY” status. If unused for 30 seconds,
LCD display will be turned OFF and enter into “DEEP SLEEP”
status. To activate the transmitter in separate cases, you can
simply press any button to wake up the Remote Transmitter.
Operating GuideOperating Guide
Step 2
How to Remote Transmitter
Buttons Work
Step 1
How to Turn the Remote Training
Collar On/Off
To turn the Remote Transmitter ON/OFF
1. Press any button on the Remote Transmitter to turn ON. The
backlight will be on.
2. If the Remote Transmitter left unused for 6 seconds, backlight
will be off and enter into “STANDBY” status. If unused for
30 seconds, LCD display will be turned OFF and enter into
“DEEP SLEEP” status. To activate the transmitter in separate
cases, you can simply press any button to wake up the Remote
Transmitter.
To turn the Receiver Collar on
Press the Power button , the Receiver Collar will a sound
“BEEP” and BLUE LED indicator is blinking per 5 seconds.
The Receiver Collar will be into “DEEP SLEEP” status if there
is no movement within 10 minutes. BLUE LED indicator is blinking
per 30 seconds. Press / / buttons on Remote Transmitter
will activate the Receiver Collar.
To turn the Receiver Collar off
Press the Power button again, the Receiver Collar will a sound
“BEEP-BEEP” and BLUE LED indicator turns off.
Notes: To extend the life of the batteries, turn off the Remote Transmitter
and Receiver Collar when you are ready not to use them for a long time.
9 10