Safety Information

Operating GuideOperating Guide
Step 8
How to Test
the Functions
Beeping Test
• Press the Button to test the Beeping function.
• The Receiver Collar will beep indication that the beeping function
works.
Vibration Test
• Press the Button to test the Vibration function.
• The Receiver Collar will vibrate indicating that the Vibration
function works.
Shock Test
• Secure the Test Bulb on the Receiver Collars' Contact Points.
• Press the Button to test the shock function.
• The Test Bulb will light up indicating the static shock stimulation
works, Test Bulb become brighter at higher shock levels.
Step 7
How to Pair the Remote
Transmitter & Receiver Collar
If your Receiver Collar does not beep when you press the Beep
Button on the Remote Transmitter, or you feel the Receiver Collar is
not responding to the Remote Transmitter, follow these steps to pair.
1. Press the Power button on the Receiver Collar to turn on the
Receiver Collar.
2. Press the Power button of
Receiver Collar for 3 seconds
to enter the pairing mode. You
will hear a “Beep” sound and
the Blue indicator consecutive
blinking. You will now have 15
seconds to finish the pairing.
3. Select the Channel 1, 2 or 3.
Press the / / on the
Remote Transmitter, and you will hear a long “Beep” sound from
the Receiver Collar indicating that pairing is completed. Then
Receiver Collar will respond to your operations on the remote.
Tips: You can choose Channel 1 / Channel 2 / Channel 3 to pair the
Remote Transmitter & Receiver Collar. The system can pair 3 Receiver
Collars at the same time. If you can not pair the device successfully, it
maybe caused by the signal interference. Please change to another place
to try or contact our service center. If you bought the dual Receiver Collars
version, follow "Step 7" above to pair the other receiver (Choose the other
channel by pressing the channel button on the Remote Transmitter).
17 18