23 Size Neck Girth (IN) Chest Girth (IN) Back Length (IN) Weight (LBS) Breed X-Small 7.8 - 8.6 9.8 - 11.8 7.4 1 - 10 Chihuahua, Yorkshire, Terrier Small 7.8 - 9.4 11.4 - 14.1 9.0 11 - 25 Poodle, Pomeranian Medium 9.0 - 11.0 13.7 - 16.5 11.0 26 - 40 Shin Tzu, Maltese Dog Large 10.6 - 12.2 16.1 - 18.5 12.2 41 - 70 Miniature Schnauzer, Pekingese Large 11.8 - 13.3 18.1 - 20.8 13.7 71 - 90 English Cocker Spaniel Large 12.9 - 14.5 20.4 - 23.2 15.
Important Safety Information WARNING: Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your Veterinarian or certified trainer. CAUTION: Safety during on-leash training.
Table of Contents Components Components 4 How the System Works 5 Key Features 6 Definition of the Product 7 Operating Guide 9 • How to Turn the Remote Training Collar On/Off 9 • How the Transmitter Buttons Work 10 • How to Find the Best Vibration/Shock Level for Your Pet 13 • Charging the Device 15 • How to Fit the Receiver Collar • How to Maximize the Distance • How to Pair the Remote Transmitter & Receiver Collar • How to Test the Functions Receiver Collar 11 14 17 Remote Transmi
How the System Works The Remote Training Collar is easy to use with an advanced digital display that tells you exactly what level of stimulation you are using. This Remote Training Collar assists you in controlling your pet without a leash in a designed remote range. At the push of a button, your remote sends a signal activating your dog's Receiver Collar. He receives a safe but annoying stimulation.
Definition of the Product Antenna Channel Select / Lock Remote Transmitter Receiver Collar Contact Point Power ON/OFF Button (Pairing Button) LED Indicator Safety Tips This product is not intended for use on dogs under 6 months old or less than 8 pounds. This product must NOT be used on aggressive dogs. If you are unsure if this product is appropriate for your pet, please consult your veterinarian or a certified trainer.
Operating Guide Step 1 How to Turn the Remote Training Collar On/Off To turn the Remote Transmitter ON/OFF 1. Press any button on the Remote Transmitter to turn ON. The backlight will be on. 2. If the Remote Transmitter left unused for 6 seconds, backlight will be off and enter into “STANDBY” status. If unused for 30 seconds, LCD display will be turned OFF and enter into “DEEP SLEEP” status. To activate the transmitter in separate cases, you can simply press any button to wake up the Remote Transmitter.
Operating Guide Step 3 Operating Guide How to Fit the Receiver Collar Important: The proper fit and placement of your Receiver Collar is important for effective training. The Contact Points must have direct contact with your pet's skin on the underside of his neck, or he cannot fee the static shock. To assure a proper fit, please follow these steps: 1. Make sure that the Receiver Collar is turned off. 2. Have your pet standing comfortably (Fig 1). 3.
Operating Guide Step 4 How to Find the Best Vibration / Shock Level for Your Pet Important: Always start at the lowest level and work your way up. The Remote Training Collar has 8 Levels for vibration and 16 Levels for static shock, with level 1 being the lowest level and level 8 of vibration and level 16 of shock being the highest. This allows you to choose the stimulation level that is best for your pet.
Operating Guide Step 6 Charging the Device The Remote Training Collar use Lithium-Polymer batteries. DO NOT charge the device near any flammable substances. Fully charge the Remote Transmitter and Receiver Collar before use. Charge the Remote Training Collar if: • The indicator light on the Receiver Collar is blinking rapidly. • There is only 1 battery level bar left on the Remote Transmitter LCD display. • The indicator light on the Remote Transmitter and Receiver collar will not come on.
Operating Guide Step 7 How to Pair the Remote Transmitter & Receiver Collar If your Receiver Collar does not beep when you press the Beep Button on the Remote Transmitter, or you feel the Receiver Collar is not responding to the Remote Transmitter, follow these steps to pair. 1. Press the Power button on the Receiver Collar to turn on the Receiver Collar. 2. Press the Power button of Receiver Collar for 3 seconds to enter the pairing mode.
General Training Guide General Tips Is the Stimulation safe for my pet? • Be consistent. Correct your pet every time he misbehaves. How old does my pet have to be before using the Remote Training Collar? • Eliminate one misbehavior or teach one obedience command at a time. If you move too fast with training, your pet may become confused. • Unless you can supervise him, it is recommended that you restrict your pet from situations in which he has a history of misbehaving.
Trouble Shooting My pet does not respond when I press a button • Make sure the Receiver Collar has been turned on. • If your range has reduced from the first time you used the Remote Training Collar, the battery(s) may be low in either the Remote Transmitter or Receiver Collar. • Many factors can impact the amount of range you have with the Remote Trainer. For a list of these factors, see "How the System Works". • Test the Receiver Collar. See "How to test the functions" for details.