User's Manual

ManualsBrandsShenzhen Senyang Zhiyuan Technology ManualsAudio EquipmentWireless headset

Wireless Headset

user manual

Packing list

Bluetooth headset host

Endurance charging box

Micro 5pin charging cable

User manual

Earplug silicone cap

Product specification

Product model: TWS

Bluetooth version: Bluetooth V5.3

Battery specification: earphone 3.7v 40mAh; Charging bin 3.7v 40mAh

Supported mode: HFP/HSP/ A2DP/AVRCP

Sensitivity: 105dB ±3dB S.P.L at 1KHz

Signal distance: 10 m (in an ideal environment without any large obstacles)

Playing time: about 2.5 hours

Talk time: approximately 3 hours

Standby time: about 80 hours

Charging time: charge the charging warehouse for about 1.5 hours,

and charge the headset for about 1 hour

Charging times for the headset: about 2.5 times

Functional instructions

1.Boot

Take the headset out of the charging bin and start it automatically or long press

the left and right multi-function button of the headset for 3 seconds.

2. Shut down

Put the headset into the charging bin and turn off automatically.

3. Boot back

When the pairing is successful, the bluetooth headset will first enter the state

of reconnect when the second time is started and automatically reconnect the

Summary of content (4 pages)

PAGE 1
Wireless Headset user manual Packing list Bluetooth headset host Endurance charging box Micro 5pin charging cable User manual Earplug silicone cap Product specification Product model: TWS Bluetooth version: Bluetooth V5.3 Battery specification: earphone 3.7v 40mAh; Charging bin 3.7v 40mAh Supported mode: HFP/HSP/ A2DP/AVRCP Sensitivity: 105dB ±3dB S.P.L at 1KHz Signal distance: 10 m (in an ideal environment without any large obstacles) Playing time: about 2.
PAGE 2
connected phone. 4. Play/pause In standby state, click the left or right earphone multifunction button to play music directly, while click the left or right earphone multifunction button to pause playing. 5. Switch songs Press the left earphone muti_function button for 2 seconds to play music, and then press the right earphone muti_function button for 2 seconds to play music. 6.
PAGE 3
1. Take out from the charging warehouse or press the left and right earphone multifunction button for 3 seconds to start up the headset until the red and blue lights flicker alternately, enter the state of search and pairing for the ear, enter the state of automatic pairing for the ear.
PAGE 4
3. Try to avoid using the earphone where there is interference source, otherwise it may affect the earphone signal. 4. Try to avoid using the earphone in a corrosive environment, so as not to affect the function of the earphone. Tips: when you use this bluetooth headset to listen to music or talk, please pay attention to adjust the volume, so as not to affect your listening too much! FCC Statement This device complies with part 15 of the FCC rules.