User's Manual

 Wrap the timing belt on the left and right side
of the Y-axis around the timing pulley
 Mount the front beam assembly on the left and
right beam as shown
3.设备安装
3
4
3. Equipment Installation
 A closer view  Pull the timing belt tight and
secure it with screws and flat
spacers. (This picture shows the
position at the back of the
machine)
M5*10 4PCS
M5*10 2PCS
Washers 2PCS
 As shown, mount the laser on
the back plate
M5*20 2PCS
M3*8 hand
screws 2PCS