User's Manual

Improper use of the laser engraver can cause eye and skin injury, fire or other serious
consequences. Please read this section of the laser engraver instructions before you begin to
ensure that it is used correctly.
Electrical Safety
In order to reduce the risk of electric shock or fire,except as advised by qualified
Lotmaxx representatives.
Do not attempt to repair or modify the machine.
Do not attempt to disassemble the machine's wiring.
Do not open the power supply or other sealed parts.
In case of any emergency or malfunction, press the emergency stop button of the
machine and disconnect the power cord.
Use a properly grounded receptacle.
Smoke and smoke safety
When you laser engrave, visible or invisible aerosols (generally referred to as "fumes and
gases") are produced. Fumes and gases are carbon monoxide or other chemical gases that are
produced depending on the material being laser engraved. Usually the fan module of the print
head can blow away some of the fumes and gases, but there will still be some unpleasant odors
left behind when engraving.
10
13
11. Safety Information