User's Manual

2.2 Alarm Setting
Hold and press AL1 button to enter the alarm setting mode,the.ln the alarm
settin mode,the display keeps flashing. Press UP or DOWN to select the
hour.Press AL1 button once to confirm the selected hour to enter minute
setting state. Once screen flashes, press UP or DOWN to select the minute.
Press AL1 once to confirm the selected minute, exit the setting mode and
return to original time on clock. AL1 time will flash across display screen
briefly.when AL1 is on/set correctly,AL1 will light up on screen.To set AL2
time,follow same steps.
To turn AL1 off and on, short press AL1 button.When AL1 rings (beeping
tone),press the AL1 button once to stop the alarm.