Specifications

1.Wh1.When en using this product, please
use the output voltage of DC 5V / 2A or
quick charge DC9V/1.68A
2.When using wireless charging, in order to
achieve the best use effect and higher
charging efficiency, it should be noted that
the wireless receiving position of the mobile
terminal must be in full contact with the
wireless charging icon on the product
surface and located in the central area.
3.Pen holder.
1.This product is for indoor use only.
2.Do not place metal products between the
wireless charging area and the charging
phone.
1.Do not place the product in water, fire,
high temperature (> 45°C) and low
temperature (< -10°C). Do not give the
product to children, especially do not let
them touch the accessories.
2.Please do not disassemble or modify the
product, so as not to damage the protective
device of the product, which may lead to
wire heating, fire or explosion.
3.Please do not throw, bump or rub the
product violently, which will cause the
product sag,perforation, cracking, deformity,
corrosion and other abnormal phenomena.
Please stop using the product immediately.
4.Please use a soft dry cloth to clean the
surface without using chemicals, soap or
detergent.
Non-product quality problems, due to
human damage, such as: product shell
damage, wear, crack, fracture, broken skin,
rupture, deformation, liquid injection, etc.;
Damage caused by disassembly or
disassembly without authorization by the
repairman of the company;
The product exceeds the warranty period;
The contents on the vouchers of the three
guarantees do not conform to or are altered
in accordance with the marks on the real
goods;
Without three guarantees or valid invoices;
Damage is caused by other force majeure
factors.
3.The lamp may be turned on or off under
the strong electromagnetic interference.
4.The light source of this lamp is not
replaceable; When the light source comes
to its end, the whole lamp should be
replaced.
5.Please be sure to check whether the
charging device is compatible with the
voltage of the product when using it.
6.When using, charging or storing the
product, if there is abnormal odor, tempera-
ture is too high (the temperature is slightly
higher in normal use but should not be hot),
color or shape change or other abnormal
phenomena, the product should be stopped
immediately and the distributor should be
contacted.
7.When using this product to charge mobile
phones and digital devices, please confirm
that the charged device is in charging state,
so as to ensure the normal operation of this
product.
8.Improper use or improper placement of
the product or material consumption by the
user may lead to the product life reduction
or damage, so the responsibility, does not
belong to the warranty responsibility,
please understand!
1.Table lamp function:
Lay the product flat on the table and plug in
the USB Type C data cable to connect the
power.
Switch button (green light is on) into
standby working state, touch the short
press first to turn on the white light, then
press the short press to turn into warm
light, continue to press the short press to
turn into natural light, and finally press the
short press to turn off the light mode cycle.
For each color temperature, long press the
switch to adjust the brightness of the light.
2.Wireless charging function:
When the power is switched on correctly,
the green indicator light will always be on.
With wireless charging will have wireless
charging function (or receiving module) of
mobile phone, wireless charging center
area, flat on the product can be a little
translation on the wireless charging launch
position, place right buttons become light
when charging light blue breath, observe
the power icon on the phone, such as
display is charging, the phone has in the
wireless charging state, when fully
charged, normally on key light into green.
When the blue light flashes, it is FOD
enabled. Please check whether metal
foreign body is misplaced in the charging
area.
Product Structure
140mm
70mm
Operating function
Instructions
Attention
1. 10W wireless output, put it on and
charge at any time.which is compatible with
7.5w and 5W downwards
2. Safe charging, compatible with
mainstream models
3. Intelligent recognition foreign body safe
and secure
4. Smart current & overcharge protection
5.LED night- light lighting, energy efficient
6. Simple design, stylish and beautiful
Rated power 2W
FAQ Reasons
Wireless
charging lamp
can't be used
1.Incorrect connection
2.Loose connection of
charging cable
3.Charging cable damaged
4.Other reasons
Digital devices
cannot be
charged by the
wireless
charging lamp
1.Incorrect connection
2.Loose connection of
charging cable
3.Charging cable and
adapterdamaged
4.This product is
malfunctioning, please
contact local distributor.
Input
Product Size
Product net
weight
Operating
ambient
temperature
Luminous flux
DC 5V 2A/9V 1.67A
> 75%
-1 °C~55 °C
120LM
10W (Backward compatible
7.5W and 5W) / 5W
The Base: 140*90 ± 2mm
Light Pole: 290mm ± 2mm
Lamp Cover:
122*48*12mm± 2mm
288g ±10g ( without charging
cable)
Wireless
charging
output power
Cold light5500-6000K
Warm light:2800-3300K
Natural light:4000-5000K
Color
temperature
Color rendering
index
Switch
>80
Touch
LED 20pcs
Interface Type C
Material ABS+silicone
Execution
standard
GB7000.204-2008/
GB7000.1-2015
Wireless
internal
conversion
efficiency
Functions
Specifications
FAQ & Warnings
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
? Reorient or relocate the receiving antenna.
? Increase the separation between the equipment and receiver.
? Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
? Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be coÿlocated or operating in conjunction with any other
antenna or transmitter. During the operation of device a distance of 15 cm surrounding the
device and 20 cm above the top surface of the device must be respected.
FCC Statement