User's Manual

49 Calls
(All Calls, International Calls or International Except
Home) and/or to Incoming Calls (All Calls or When
Roaming). In both cases, Cancel All option applies to
all calls at once.
Change Barring PW allows you to change the call
barring password. Status allows you to check
whether or not a particular type of call has been
barred.
This feature is network dependent and requires
a specific call barring password supplied by
your service provider.
Auto Redial
When this function is On, your phone will
automatically redial this number at intervals if the
call you have dialed is not answered.
Fixed Dial
This menu allows you to restrict your outgoing
calls. You need to enter PIN2 code, which has to be
supplied / supported by your network operator.
Not all SIM cards support PIN2 code. If your
SIM card does not have a PIN2 code, this option
is not available.
IP Number
This menu allows you to store 3 groups of IP
number so that you need not enter the number
before you make an IP call. Tap on Activate to
activate or Edit to edit the IP Number.
The IP number has to be supported by your
network operator before you can make an IP
call. When you change a new SIM card, the IP
number you have stored will be cleared. The
phone does not validate the IP number you
have entered. Therefore, please ensure that the
numbers are correct.
Clear history
This menu allows you to clear the call history in:
Delete All/Missed Calls/Received Calls/Dialed Calls/
Mode There are two modes: On (you only dial
the numbers stored in the Fixed Dial List)
and Off (you can dial any number).
Fixed Dial
List
Displays the fixed dial list. Tap on Add
to enter the name and phone number,
then tap on OK, enter PIN2 code and
tap on OK again.
X800_GB_EN.book Page 49 Thursday, May 29, 2008 6:10 PM