User's Manual

14 Calling
• End the call : Press ) .
•
To answer or end a call using the supplied
one-key headset,
see "Headset" on page 57.
The phone will vibrate for incoming calls if it is
in Meeting mode (see "Profiles" on page 44 ).
Options during a call
During a call, you can press , to select H-Free or
H-Held mode. Press LOptions to access the
following options:
- Hold: Put current call on hold.
- New call: Make a new (a second) call.
- Phonebook: Add or view contacts.
- Messaging: Send and receive messages.
- Mute: Mute/unmute the call.
- Enabling DTMF (the touch tone dialing
system).
Mute or unmute a call
During a call, select Options and select to set the
Mute function On / Off . If you select Mute , the
microphone will be deactivated.
Adjust the headset volume
During a call, press + or - side keys to increase or
decrease the volume.
Handle multiple calls (network-
dependent)
You can handle two or more calls at the same time,
as well as make conference calls with your phone.
The availability of this feature is dependent on your
network operator and/or your subscription.
Make a second call
You can make a second call when there is an active
call or with a call on hold. While on the phone, dial
the number (or select a contact from the
phonebook) and press
( . The first call is put on
hold and the second number is dialed. You can then
select LOptions to access the following options:
• Swap to toggle between 2 calls.
•
Conference to introduce the caller into a conference
call.
•
Transfer to connect the two calls. You are
disconnected when the transfer is completed.
•
End single to disconnect one party from the call.
•
End all to disconnect all party from the call.
•
New call to make a new call.
•
Phonebook to add or view contacts.
•
Messaging to send or receive messages.
•
Mute to deactivate the microphone.
X710_En_Book.book Page 14 Thursday, October 23, 2008 10:12 AM