User's Manual

Getting Started 7
4. As shown, align the metallic connectors on the
battery and battery slot. Insert the battery
until it is locked.
5. As shown, insert the back cover
. Press it down
until it is locked.
Remove the protective film covering the screen
before using the phone.
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged. The battery
symbol indicates the state of the battery. To charge
the battery, plug in the connector as shown below.
Then plug the other end into a power socket.
During charging, the battery symbol scrolls. It takes
about X hours to fully recharge the battery.
Depending on the network and condition of use,
talk time goes up to X hours and stand-by time up
to X month.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off
the charger is to unplug it, so it is advisable to
use an easily accessible power socket.
X700_En_Book.book Page 7 Thursday, November 6, 2008 6:42 PM