User's Manual

Business 27
The ringtone of your incoming calls is changed
to the recording. To change the ringtone, see
"Adjust ring settings to different scenes" on page
43. To use the ringtone for contacts, see see "Add
a contact to Smart Phonebook" on page 22 or see
"Group contacts on the Smart Phonebook" on page
23.
Use your business assistant
Alarm
You can set up to five alarms.
To set an alarm,
1. Check that your clock is correctly set (see
"Set clock" on page 8).
2. Go to Business > Alarm.
The screen of alarm list appears.
3. Select an alarm, and press
,Edit to enter the
alarm setting screen.
Set time: Set the alarm time.
Repeat: Repeat the alarm once or on some of
the weekdays or weekends. To repeat the
alarm at certain days, press < or > to select
Customize,
- and < or > to select a weekday or
weekend, and press
, to turn the alarm on
or off on the certain day.
Audio options: Select an alarm tone.
Snooze: Select an alarm interval: Off, 2, 5, or
10 minutes.
4. Select LDone when you finish setting the
alarm.
5. To turn off an alarm, select an alarm and press
LOff.
To use an alarm,
On the set alarm time, your alarm sounds.
Select Stop: The alarm stops. If you have selected
repeat mode for the alarm (see “To set an alarm”),
it will sound again at the set time.
Select Snooze: The alarm will sound again after the
set Snooze interval. You can select Snooze three
times.
The alarm clock will ring even if your mobile
phone is switched off, will not ring or vibrate if
the Profiles is set to silence, and will only vibrate
if the Profiles is set to Meeting.
World clock
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
1. Go to Settings > General > Time & date.
Check that Display time is set to Analog clock
or Digital clock.
X700_En_Book.book Page 27 Thursday, November 6, 2008 6:42 PM