User's Manual

Getting Started 9
For more information on PIN code, see “Security” on
page 72.
If you enter an incorrect PIN code 3 times in
succession, your SIM card will be blocked. To
unblock it, you must obtain the PUK code from
your network operator.
Charging the battery
Your phone is powered by a rechargeable battery.
The new battery is partially charged. A sound alert will
be emitted to warn you when the battery level
becomes low.
We recommend that you do not remove the
battery when the phone is switched on as you
may lose all your personal settings as a result. If
you do remove it, the date and time settings are
only memorized for a short while. As such, you
need to reset the information after you have
installed the battery back again.
Once the battery and battery cover are installed,
you can charge the phone. Plug in the connector as
shown below. Then plug the other end into an AC
power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 4 hours to fully charge the battery.
When all the scroll bars are steady, the battery is
fully charged. You can then disconnect the charger.
Depending on the network and condition of use,
talk time and stand-by time can go up to 16 hours*
and 1440 hours (2 months)* respectively.
*Depending on the network conditions, user
settings, method of use, etc the actual results
may differ.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off