User's Manual

Getting Started 11
You can use the phone while it is charging. If the
battery is completely flat, the battery symbol will
only reappear after a few minutes of charging.
Set clock
1. Check that your phone is switched on.
Long press ) if necessary. Enter the
PIN code if required. A PIN code is a 4- to
8-digit secret code of your SIM card. It is
preconfigured and communicated to you
by your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
2. On idle screen, press ,Menu and go to
Settings > General > Time & date.
Set time/date: Enter the time and date by
using the numeric keypad.
Time/Date format: Select the time (12-hour
or 24-hour clock) and date format by
pressing the navigation keys +, -, <, > and
,.
3. To display time and date on the idle screen,
go to Settings > General > Time & date >
Display time.
Press , to turn on the clock.
Display local and international
clocks
You can display two clocks on the idle screen,
one showing your local time and one the time of
your destination.
1. Check that you have set your local time
and date.
2. Go to Settings > General > Time & date.
Check that Display time is set to On.
3. On the idle screen, press ,Menu and go to
Settings > General >Time & date>
International clock.
Clock status: Press , to choose to turn on
the international clock.
X530_En_Book.book Page 11 Thursday, February 26, 2009 12:02 PM