User's Manual
Table Of Contents
- Trademark Declaration
- Your Phone
- Assembling and Charge
- Use your phone
- Safety & Precaution
- Precaution
- Disposal of your old product
- Tips
- Troubleshooting
- The phone does not switch on
- The display shows BLOCKED when you switch on the phone
- The display shows IMSI failure
- Your phone doesn’t return to idle screen
- The network symbol is not displayed
- The display doesn’t respond (or the display responds slowly) to key presses
- Your battery seems to over heat
- Your phone doesn’t display the phone numbers of incoming calls
- You can’t send text messages
- You can’t receive and/or store JPEG pictures
- You feel that you have missed some calls
- When charging, the battery icon shows no bar and the outline is flashing
- The display shows SIM failure
- When attempting to use a feature in the menu, the display shows NOT ALLOWED
- The display shows INSERT YOUR SIM CARD
- The autonomy of your phone seems lower than indicated on the user guide
- Your phone doesn’t work well in your car
- Your phone is not charging
- The picture captured with the phone camera is not clear
- Specific Absorption Rate Information
- Declaration of Conformity
4
Tips:
•
You can use the phone while it is charging.
•
Keeping the charger plugged to the mobile phone when the battery is
fully charged will not damage the battery.
•
If a fully charged battery left unused, it will lost its charge over time.
•
If a battery is being used for the first time or the battery has not been
used for a prolonged period, it may take longer time to recharge.
5
Replace the back cover.
6
Charge the battery.
7
Insert the SD card
(Maximum: 32GB)