User's Manual

Settings 71
Sounds
You can set your phone to operate with different
sound profiles. For details, see “Profiles” on page 61.
If you have downloaded your own ring tones and have
selected such a ring tone to be the alarm alert, then
after you set the alarm and switched off the phone, the
alert tone will be changed back to the original factory
settings. This does not apply if the ring tone you have
chosen is one that comes as default with your phone.
Connectivity
Call settings
For more information, see “Call settings” on page 66.
Message settings
For more information, see “Message Settings” on page 45.
Network settings
The network name will be displayed on the idle
screen. If the phone is not able to identify the network
name, it will display the country code and the
network code of the unknown network.
Select network
It will vary according to the search mode you have
selected. If you select Automatic, the network will be
searched automatically. If you select Manual, the
search will commence only when you confirm to start
searching.
Greeting Turn greetings On or Off. When you
select On, you can edit the greetings
message.
The maximum length of greetings is 20
Chinese words or 50 English characters.
Options Description
Alert type You can select Ring only, Vibrate only,
Vibrate then ring or None.
Ringtones Select the ringtone for Contacts calls,
Appointments, Messages, Cell info,
Alarm and Other calls.
Ring
volume
Select from 10 volume levels.
Key sound Turn key sound On or Off.
Shutter
sound
Select from 3 shutter sounds. You can
also select Off.
Low battery Turn warning On or Off.
x-saber_master_en.book Page 71 Wednesday, November 14, 2007 12:42 PM