User's Manual

Getting Started 11
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage
the battery. The only way to turn off the charger is
to unplug it, so it is advisable to use an easily
accessible AC power socket.
If you do not intend to use your phone for several
days, we recommend that you remove the battery.
You can use the phone while it is charging (note
that the vibra alert goes off when the charger is
connected). If the battery is completely flat, the
battery icon will only reappear after a few minutes
of charging.
Insert a micro SD Card
Gently slip the card into the micro SD card slot and
press it down until the card locks into place, the
card's gold contacts will be facing upwards.
To remove the micro SD card, push down the card
into its slot and release it. The card will spring out
of the slot.
Setting hotkeys
You can configure the numeric keys 2 - 9, +, -,
<, >, L and R to access your favorite features.
Once they have been set, you can simply long press
the numeric key to access the corresponding
features.
Majority of the hotkeys have been preset and
configured. To check the hotkey settings, go to Settings
> General > Shortcuts > Hotkey. To change the hotkey
setting, press the numeric key you wish to change and
select Options > Change, then select a feature to be
associated with the numeric key from the following
list:
• Alarm • Flight mode
•Calendar •Games
•Voice Memo •Homepage
Xsaber_01_GettingStarted.fm Page 11 Monday, December 10, 2007 6:11 PM