User's Manual

 Owner’sManual
28

‐Cleaning
 De‐dustcomponents of the basestation regularly with cleananddrylint
free cloth or brush, in order to maintain their cleanness and avoid bad
contact.
 Whenthepowerkey ,controlknob,displayscreenandinterfacesgetdirty,
cleanthemwithanon‐wovenclothsoakingwithneu
tralde
tergent.Donotuse
strongcorrosivechemicalsolution,forinstance,detergent,alcohol,sprayagent
oroilpreparation,forcleaning.
Aftercleaning,makesurethebasestationiscompletelydry,otherwisedonot
operateit.
The maximum allowable station effective radiated power (ERP) is dependent
upon the station's antenna HAAT and required service area and will be authorized
in accordance with table 2.

Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the General
Population/Uncontrolled environment RF energy exposure limits in the above
standards and guidelines, users should transmit not more than 100% of the time
and always adhere to the following procedures:
● Antenna gain must not exceed 8.0dBi.
●The antenna must be installed complying with the requirements of manufacturer
or supplier, and it must be at least 3.5 meters away from human body.
●The device’s antenna must be fixed mounted on outdoor permanent structures.