User's Manual

 Owner’sManual
13

2. Samecolorcode
3. Subscribersthatmakecallsshouldbeinthesamegroup.
Term ina ls for trunking calls should satisfy the following conditions for proper
functioning:
1. Thecontrolchannelofthebasestationisregistered.
2. Radio’sIDisregisteredinthebasestation.
3. Groupcallisregisteredoropene
dinthebasestation.
4. Colorcodeandsystematiccodeshouldcorrespondtothebasestation.



ChooseinterFrequency
 Presstheknobtoenter“ChooseinterFreq”.
 Transceiver can save 16 inter frequencies, which are available for all
operating modes. Num1～16 stands for inter fr
equency, while Num 0
standsforthecurrentfrequency.Ifyouaccidentallyenterintothismenu
Note：
1. Under trunking mode, radio can not join the network only by interface
changing. Radio ID and group call numbers should first be registered
throughnetworkmanagementsoftwareinthecorrespondingpage.
2. Thismodeswitchingfunctionisapurchasedfunction.Ifuserdoesnotpay
forit,thefunctionwillnot bevalid.For moreinformationplease contact
withdealer. 