User's Manual

7 / 25

Before Use

Charging the Battery

Only use the charger and battery specified by Samhoo. The charge LED will indicate the

charging progress.

。

Procedures

1. Connect the power adapter to an AC source socket and the rear jack of the charger;

2. Place the terminal with the battery attached, or the battery alone, into the charger,

Make sure the battery’s charging pieces are in good contact with the charger’s

terminals;

3. The charging process begins when the charger LED solidly glows red.

4. When charging is complete, green LED glows. Then remove the battery or the

terminal from the charger.

The standard 2000mAh Li-Ion battery may take 3 hours for an ordinary charge. But before

initial use, please charge it for 5 hours to achieve optimal battery performance.

LED Indications and Charging Progress

LED Indicator Status

LED flashes red slowly. Standby (no load)

LED solidly glows red. Charging

LED solidly glows orange Charging (above 85%)

LED solidly glows green Fully charged

LED flashes red rapidly Failure