User's Manual

20 / 25

To enter the menu, press [options] button to enter the main menu and select "scan".

 Scan on/off

Scanning function can help you to listen to the communication activities of other

channels, to understand the current status of related group activities. You can use this

option to open or close the scanning.

 Scan list

You can create a scan list by the dealer for each channel, each scan list contains at

most 32 channel, can contain both digital channel also contains the analog channel.

Choose to enter a scan list, you can perform the following operations:

 Add Channel

Add a new channel in the current scan list.

 Edit the priority channel

You can use the currently selected channel is arranged as a priority channel or

non-priority channel. If focus on a certain channel activity, which can be set as the

priority channel. Scanning frequency priority channel is higher than that of non-priority

channel.

 Delete Channel

Delete a channel scan list, but you cannot delete the first channel scan list。

■Host information

This option can check the machine information, such as the ID, band, version information.

Troubleshooting

Symptom Solution

The terminal can not be

powered on.

Please check whether battery power is too low or whether

the battery fails to function.

Network registration fails or

network can not be found.

1. Please check the signal strength and see whether

your terminal is within the network coverage.

2. Contact the network administrator, and confirm

whether the terminal has acquired appropriate

authorization.