Users Manual

4.1 Short press to lock the button（ ）, and then short press to
unlock.
4.2 Recommended to lock the buttons when not in use to
prevent misuse.
5.Pairing(One‐to‐one has been paired in the factory, you
can use it directly)
5.1 Make sure the collar is turned off. Press and hold the power
button（
）for 3 seconds, until 4 beeps are heared, the indicator
light flashes alternate ly, then it is ready to pair.
5.2 Press and hold the remote control channel switch button
（
）for 3 seconds within 30secs, then short the button（ ）
to select the collar that will be paired.
5.3 Short press the left arrow button （
） on the remote
control to confirm the pairing, and a beep means the pairing is
successful.