Users Manual

matched first.
3.2 If it cannot be paired, the collar and remote control should be fully
charged first. The collar must be in the off state, and then long press the
power butto n for 3 seconds to enter the red and green light flashing
state before pairing (valid time is 30 seconds).
3.3 Check whether the remote control buttons are pressed.
3.4 Check whether there is a strong signal, electromagnetic field
interference, etc. You can cancel the pairing first, and then re‐pairing can
automatically select a new channel to avo id interference.
4.The collar automatically emits sound, vibration, or electric shock
signal, you can check first: check whether the remote control buttons are
stuck.
Operating environment and maintenance
1.Do not operate the device in a temperature environment of 104°F and
above.
2.Do not use the remote control when it is snowing, it may cause water
ingress and damage the remote control.
3.Do not use this product in places with strong electromagnetic
interf erence, which will seriously damage the performance of the
product.