Users Manual

Trouble shooting
1.When pressing buttons such as vibration or electric shock, and there
is no response, you should first check:
1.1 Check if the remote control and collar are turned on.
1.2 Check whether the battery power of the remote control and collar is
sufficient.
1.3 Check if the charger is 5V, or try another charging cable.
1.4 If the battery has not been used for a long time and the battery
voltage is lower than the charging start voltage, it should be charged for
adifferentperiodoftime.
1.5 Verify that the collar is providing stimulation to your pet by placing a
test light on the collar.
2.If the shock is weak, or has no effect on pets at all, you should check
first.
2.1 Make sure that the contact points of the collar are snug against the
pet's skin.
2.2 Try increasing the shock level.
3.If the remote control and collar do not respond or cannot receive
signals, you should check first:
3.1 Check whether the remote control and the collar are successfully