Installation Tips

A
B
D
C
solar motion alarm light
( Professional version)
Solar panel： 5V*120mA Effective ETFE polysilicon solar panel
LED ： 8 LED
Functions ： Mode 1, 24hrs Siren sound / flashing
Mode 2, Night day flashing alarm + wireless receiver
Mode 3, No flash alarm all day + wireless receiver
Mode 4, No flash alarm at night + wireless receiver
Charge modes： Solar panel
Charge time： Solar energy ＞10hrs
work time：motion sensor 40 seconds＞300times，
Alarm button off standy by time＞60days，
Alarm remote off standy by time＞5days
Alarm volume:129Db
Waterproof： IP65
Battery： 3.7V*1200mAH
full capacity lithium-ion
Distance： 5-8m（ affected by ambient temperature ）
Remote distance：10m ~200m（
in open area without any interference ）
Specification
Product features
1. Optional: Mobile phone display alarm and alarm system with wirelss
Receiver (refer actual purchase model)
2. Full all day outdoor work ,IP65,ensrgy saving/environmental/safe .
3.Suitable for use in house,garden,build,farm and warehouse.etc .
4.5-8m distance，70°sensing angle, 129dB lound /flashing .
5.Full day 24hrs/ Night day 12Hrs work modes.
6.120 standy time. average charge 1 hours can work all days.
7. RF433MHz wireless remote contolled. can adjust differnt sensing angle.
8. Solar panel charged，rechargeable lithium battery can work long time.
9. Detect the moved people within 30 seconds untill people leaving.
Distance:5~8M
＜4M
Test ambient temperature ≤25℃
30°
Sensing angle
70°
Functions
1. Mode 1 (Remote A) : Full day 24 Hrs modes-flashing alarm sound.
2. Mode 2 (Remote B) : Full day 24 Hrs modes-flashing only.
3. Mode 3 (Remote C) : Nigh time modes-flashing alarm sound.
4. Mode 4(Remote D) : Nigh time modes-flashing alarm only.
5. long press any key on remote for 5 seconds: turn off.
Remote program
(wireless RF:433MHz)
1. Please ensure no signal interference within 100meters when resetting
remote program.
2. Remote can be programmed to multiple alarms, need program to alarm
one b
y one
Tips:lf there are other signals sffsct the setting fale need try more tims
Long press the power button
on the back of the lamp for 5
seconds untill 8 LED lighting on
.
Step 1
Press any key on remote for once
(heard Bi,Bi sound ---loose the hands)
After then alarm auto turn off, mean
completed the program
Step 2
A
B
D
C
① ② ③
Installation
Tips：Each work modes changed need wait for 20seconds then enter work
1. 1. Working temperature : -10°~50°
2. Low battery power may cause fales alarms.
3. Any moving object close to human body temperature can make siren.
4. Environmental Temp, ligh intensity and signal interferences may affect
sensors ,Higher Temp may cause less sensitivity and may also shorten
sensing distance.
5. Remote distance is affected by environmental signal interference
and buildings.
6. Power on product before use remote control.
Attention
-------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------
N911F